Parts & Accessories
Column Parts & Accessories
For any parts/accessories not listed on this page, please reach out to your local YMC rep or contact our office for assistance.
Guard Cartridges & Holders
YMC recommends the use of guards for added protection and longer life of your column. Information about the different options we offer can be found here.
If you just need a holder, find the appropriate part number below:
| Part Number | Description |
|---|---|
| XPCHUHP | EXP® direct connect holder for UHPLC guard cartridges (Part numbers ending in “-E5**CC”) |
| XPGCHP1 | Holder for 10mm length analytical guard cartridges (Part numbers ending in “-01**GC”) |
| XPGCHP2 | Holder for 20mm length analytical guard cartridges (Part numbers ending in “-02**GC”) |
| XPCHSPW1 | Holder for 10mm ID guard cartridges (Part numbers ending in “-0110CC”) |
| XPGHFSP20ID | Holder for 20mm ID guard cartridges (Part numbers ending in “-0120CCN”) |
| XPGHFSP30ID | Holder for 30mm ID guard cartridges (Part numbers ending in “-0130CCN”) |
Column Couplers
| Part Number | Description |
|---|---|
| U-284 | Delrin column coupler, 10-32 threads, 1.3 μL swept volume, 0.17 mm thru-hole. For use with guard cartridge holders XPGCHP1 and XPGCHP2 |
| XRCP1601E-1PK | Capillary column coupler, 1/16″ OD, 0.1 mm ID, 10-32 thread (includes SS tube, 2 x male nut, 2 x ferrule) |
| XRCP3201E-1PK | Capillary column Coupler, 1/32″ OD, 0.13 mm ID, 6-40 thread (includes SS tube, 2 x male nut, 2 x ferrule) |
| XRCP1602 | Column Coupler, 1/16″ OD, .01″ ID, 5 cm length |
| XRCP1605 | Column Coupler, 1/16″ OD, .02″ ID, 5 cm length |
| XRCP1620 | Column Coupler, 1/16″ OD, .03″ ID, 5 cm length |
| XRHTF-01 | Hand-tight EXP fitting for UHPLC (includes nut and one titanium hybrid ferrule) |
| XRHTF-05 | Replacement titanium hybrid ferrule, pack of 5 |
Precolumn Filters
Precolumn filters can extend the column life by filtering out fine particles from the sample that would otherwise clog the column frit.
YMC filter units are designed for tubing systems with a 1/16” outer diameter. Both stainless steel and PEEK units are available.
| Part Number | Description |
|---|---|
| XRPRCS03 | Precolumn Filter Unit, SS, for tubing system with 1/16″ OD. 1 filter included. |
| XRPRCS35 | 5 spare stainless steel filters for XRPRCS03, 0.5 µm |
| XRPRCP02 | Precolumn Filter Unit, PEEK, for tubing system with 1/16″ OD. 1 filter included. |
| XRPRCP25 | 5 spare PEEK filters for XRPRCP02, 2 µm |
OPTI-SOLV® Mini Filters employ an automatic tube stop depth adjustment that results in perfect zero-dead-volume connections.
No tools are required, and the filters thread directly into any 10-32 port without the need for a holder.
| Part Number | Description |
|---|---|
| YMA-90-50-05596 | OPTI-SOLV Mini Filters, 0.5 µm, pack of five |
| YMA-90-50-05599 | OPTI-SOLV Mini Filters, 2 µm, pack of five |
Connectors
MarvelXACT™ UHPLC Connection Systems are designed to prevent over- or under-tightening with a patented torque-limiting mechanism. Once optimum torque has been achieved through finger-tightening, a “click” will let you know that you’ve achieved the perfect connection! MarvelX sealing technology, in which fittings seal at the bottom of the port, eliminates additional internal volume and minimizes the risk of carry over, peak tailing, and broadening. MarvelXACT connectors can withstand pressure up to 19,000 psi for routine use and maximum temperature of 120 °C.
YMC carries 100 µm ID connectors in 150, 250, and 500 mm length with both stainless steel and PEEK-lined stainless steel assemblies.
| Part Number | Description |
|---|---|
| UPFP-YMA7100150 | MarvelXACT Connector, PEEK-lined SS, 100 μm ID x 150 mm length |
| UPFP-YMA7100250 | MarvelXACT Connector, PEEK-lined SS, 100 μm ID x 250 mm length |
| UPFP-YMA7100500 | MarvelXACT Connector, PEEK-lined SS, 100 μm ID x 500 mm length |
| UPFS-YMA7100150 | MarvelXACT Connector, SS, 100 μm ID x 150 mm length |
| UPFS-YMA7100250 | MarvelXACT Connector, SS, 100 μm ID x 250 mm length |
| UPFS-YMA7100500 | MarvelXACT Connector, SS, 100 μm ID x 500 mm length |
YMC Handy Connectors are available for both high- and low-pressure tubing systems and are suitable for metal-free tubing systems using PEEK tubes.
Handy Connector 1 can resist pressure up to about 21 MPa. The entire unit is made from PEEK and connects easily to tubing systems via the integrated ferrule.
Handy Connector 2 can be used for connection to the injection side of a column, as it can resist pressure up to about 42 MPa, and is also useful for connecting a guard or precolumn filter. This connector can also be used with metal-free tubing systems as the ferrule at the wetted part of the connector is made from PEEK. In addition, the user need only replace the removable ferrule when it deteriorates, as opposed to the entire connector unit.
| Part Number | Description |
|---|---|
| XRP0203 | Handy Connector 1 with integrated ferrule for 1/16″ tubing systems, pack of 10 |
| XRP0204 | Handy Connector 2 with replaceable ferrule for 1/16″ tubing systems, pack of 2 |
| XRP0205 | Spare PEEK ferrule for XRP0204, pack of 10 |
Empty Columns
Our standard empty columns consist of a stainless-steel tube with screw-type endfittings. Dimensions range from 2.0 – 30 mm ID and 30 – 500 mm length. (Note: not all combinations of inner diameter and length are available.)
For inner diameters of 50 – 200 mm, empty columns consist of a stainless-steel tube with a flange and cap tightly connected with a bolt. When ordering, you may choose one of three connection types: 1/16” male nut, 1/8” female nut, or 1/4” female nut. Available lengths range from 50 – 1000 mm, depending on ID.
Additional Parts/Accessories
| Part Number | Description |
|---|---|
| XRON8 | SS female nut for 1/8″ tubing system, pack of 5 |
| XRONFA | SS one ring ferrule for 1/16″ tubing system |
| XRTWFA | SS front & back ferrule for 1/8″ tubing system, 5-pack each |
| XRONW | SS male nut for 1/16″ tubing system, pack of 5 |
| YGHODS002 | Sumichiral Filters, pack of 5 |
| YGUACC001 | Sumichiral Holder |
LC Parts & Accessories
| Product | Phase / Type | Separation Mode(s) | Pore Sizes | Particle Sizes | pH Range | Available Formats | Link to Order |
|---|---|---|---|---|---|---|---|
| Column Couplers | Parts & Accessories | - | - | - | - | Parts & Accessories | |
| Connectors | Parts & Accessories | - | - | - | - | Parts & Accessories | |
| Empty Columns | Stainless Steel Chromatography Columns | Parts & Accessories | - | - | - | - | Analytical (1 - 8 mm ID)Preparative (10 mm ID & above)Parts & Accessories | |
| Guard Cartridge Holders | Parts & Accessories | - | - | - | - | Parts & Accessories | |
| Other Parts & Accessories | Parts & Accessories | - | - | - | - | Parts & Accessories | |
| Precolumn Filters | Parts & Accessories | - | - | - | - | Parts & Accessories |
